The Maruti Celerio will introduce to the Indian market the two-pedal (accelerator and brake) Auto Gear Shift technology, which the company has christened as EZ Drive, pronounced as ‘easy drive’. Auto gear shift it is, but is it an automatic transmission? Not exactly.
The EZ Drive is essentially a simple manual transmission that has been robotised. It uses a regular manual gearbox and a clutch (there is no clutch pedal though), but acts like an automatic, changing gears for the driver with the help of a dedicated ECU and actuators (call it a robotic arm). Unlike traditional automatic transmission, there is no torque convertor.
How does it look: The gear-lever unit, placed between the two front seats, looks exactly like a traditional automatic transmission unit. Towards the right, there are three slots—‘N’ for neutral, ‘D’ for drive and ‘R’ for reverse. Towards the left, there is one slot marked ‘M’ for manual. In the manual mode, there are options of ‘+’ to upshift and ‘-’ to downshift gears.
How does it drive: Before starting the engine, ensure the gear lever is in the ‘N’ mode and the brake pedal is pressed. Once the engine starts, put the gear lever in the ‘D’ mode and release the brake. The car will start moving, but slowly—this is called the ‘Creep’ function, which is effective in urban stop-and-go traffic. Gradually, step on the accelerator and the car will pick up speed. Based on how much you press the accelerator, the car will move to a higher gear, the highest being fifth in Celerio’s case.
Similar to the traditional automatic transmission unit, the EZ Drive offers the ‘M’ mode—put the gear lever in the ‘M’ position and then shift gears by pushing the lever to either the ‘+’ or ‘-’ modes.
How does it stop: Pressing the brake reduces the speed of the car and the gears shift down automatically until the car comes to a complete stop. Then you have to shift the lever to the ‘N’ mode, switch off the engine and engage the parking brake. But unlike most traditional automatics, the EZ Drive does not